Menu
Warehouse & Storage Building Construction in Wichita, Kansas - Clear-Span Warehouse Interior
WAREHOUSE CONSTRUCTION ยท WICHITA, KS

Post-Frame Warehouse & Storage Building Construction in Wichita | Clear-Span Warehouse Builders In The South-Central Kansas Region

Buildings as large as 50,000+ square feet are a common ask in the Wichita area. Wichita Pole Barn Builders constructs warehouse and storage buildings for businesses and landowners. Our company got started 12 years ago building larger scale buildings for industrial clients, with crews carrying more than 25 years in metal building construction, so we are able to take on just about any size.

We design for clear spans, plan the slab for your everyday traffic, and size dock and overhead doors if need be. A warehouse is reviewed under the 2024 IBC at the Risk Category the design professional assigns for your use, with sealed plans. Call our local expert builders today so we can start planning your warehouse or storage building.

Call 316-688-2046 Now โ†’

Get Your Pole Barn Quote

Tell us about your project. We'll call you back fast.

We'll respond same-week. Need to talk now? Call 316-688-2046.

Clear span
No interior posts in the way
25+ yrs
Metal building experience
Free
Written, itemized estimate
80,000
Sq ft, our largest projects

We Build Warehouse & Storage Buildings in Wichita & South-Central Kansas

Warehouse space is judged on usable square footage per dollar more than almost any other building type, which changes how we approach the design from day one.

  • Code basis: ASCE 7, current IBC
  • Wind load basis: 115-120 MPH ultimate
  • Framing type: Clear-span truss engineering
  • Slab edge: 8-12 in. thickened edge at dock points

Clear-Span Economics

Every interior support post in a warehouse is square footage you can't use for racking or staging. Engineered clear-span trusses allow wide spans at a lower cost than steel-frame or masonry alternatives, while the panel diaphragm carries the lateral load.

Where a clear-span post-frame warehouse lands depends on Risk Category, the span you need and how far the finish goes.

Technical Specs

  • Code basisASCE 7, current IBC
  • Wind load basis115-120 MPH ultimate
  • Framing typeClear-span truss engineering
  • Slab edge8-12 in. thickened edge at dock points
  • Framing typeClear-span, mezzanine-ready
  • FastenersCorrosion-resistant throughout

Engineering to Code, Not Just Convention

Every warehouse is sized to the applicable ASCE 7 Risk Category, with documentation ready for MABCD plan review, since warehouse occupancy typically requires full review.

Girts and purlins do the same structural work here as on any post-frame building, with loading dock framing and wider door headers for truck access built into the design from the start.

Slab and Fastener Specification for Long Service Life

Slabs get designed for your actual forklift wheel and rack loads, which at loading dock areas often lands on an 8 to 12 inch thickened edge, well beyond a standard residential slab perimeter.

Stainless or corrosion-resistant fasteners throughout, matched to the panel supplier's approved details, reduce corrosion at the fasteners over the building's service life.

Thickened-edge slab and fastener detail on a warehouse build

How a Warehouse Gets Priced

A warehouse is priced off its own drawings, because what you are really buying is usable cube, and no footprint figure captures what sets it. We start from your racking plan, since bay spacing and clear height should follow the racks instead of the other way around, then size the clear span so no interior post eats a rack position. Forklift wheel loads set the slab, with 8 to 12 inch thickened edges at dock and entry points, and dock height against grade level decides the approach grading. An advertised shell package can leave all of it to you, so settle the scope before you weigh the price. Materials come through our regional suppliers at fair market rates. It could be a bare clear-span shell, or a 60×150 distribution building with two dock-height doors and a grade-level overhead for forklifts, where the insulated door package by itself runs $4,000 to $14,000+. Send over your racking plan and equipment list and we will talk through a range on the phone, then price it firmly after a site visit.

Free
Written, itemized estimate
25+ yrs
Metal building experience
80,000
Sq ft, our largest projects

Meeting Commercial and Institutional Code Requirements

Warehouse-scale buildings are where thickened-edge slabs and Risk Category classification matter most directly, since forklift traffic and occupancy load both scale up fast. Commercial, aviation, and assembly-occupancy buildings carry a different code burden than agricultural structures, and the engineering has to show it on paper.

  • Stamped engineered drawings. Required for essentially all commercial post-frame work, referencing the ASCE 7 Risk Category the design professional assigns for the proposed use.
  • ADA-compliant entry thresholds. Set by the accessibility requirements that apply to your occupancy, planned into the slab and door jamb detailing from the start rather than retrofitted.
  • Fire-rated wall assemblies. One-hour or two-hour drywall assemblies at demising walls where code requires separation between occupancies or tenant spaces.
  • Interior liner panel packages. 29-gauge white metal liner panels are a common commercial interior finish, paired with the continuous wall insulation the designer specifies for code compliance, and an easy surface to clean.
  • Thickened-edge slabs. Commercial slabs supporting forklift traffic are designed for the actual wheel and rack loads, which often calls for 8 to 12 inch thickened edge footings well beyond a standard residential slab perimeter, especially at dock and entry points.
  • MABCD plan review. Commercial occupancy in the Wichita metro core typically requires full plan review through the Metropolitan Area Building and Construction Department before a permit is issued.
  • Continuous wall insulation. Specified by the designer where the energy code compliance path for your occupancy calls for it, typically installed alongside the liner panel package rather than as a separate retrofit step.

Designing for Racking and Forklifts

Rack layout should come before column layout. Picking the bay spacing and clear height from your racking plan avoids a building that wastes cube.

Forklift wheels put heavy point loads on the slab. A warehouse floor is engineered for those loads, and edges at dock doors are often thickened, a design choice your engineer makes from the actual equipment weight.

Dock and overhead doors

Dock-height doors need a recessed or raised approach. Grade-level overhead doors work for box trucks and forklifts driving straight in.

Our Process on a Warehouse Job

Warehouse jobs start with three documents: your racking plan, a list of the trucks and forklifts that will use the building, and a survey of the site. With those in hand, we can lay out bay spacing, door positions and slab design, then coordinate revisions as the design firms up.

You then get a free written estimate. The design professional prepares sealed drawings for MABCD's commercial review, and once the permit is issued our uniformed crew erects the frame and sheeting while slab and site work stay on the same schedule.

Permits for a Warehouse

A warehouse is a commercial building, so it goes through MABCD's full commercial review in Wichita and Sedgwick County. Plans are sealed by Kansas-licensed professionals.

A few extra items come with larger sites.

Frequently Asked Questions

How does post-frame compare in cost to a steel-frame warehouse?
Post-frame usually comes in lower than steel-frame for clear-span warehouse space, mainly because the foundation and erection are simpler. Where it lands still depends on Risk Category, clear span and finish level.
How large a warehouse can you build?
Buildings over 50,000 square feet are a common ask here, and our largest projects run to 80,000 square feet, all framed clear span so no interior posts block racking.
Does a warehouse have to go through full plan review?
Yes. Warehouse occupancy is commercial, so plans sealed by Kansas-licensed professionals go through MABCD's full commercial review. The design professional assigns the Risk Category for the proposed use under the 2024 IBC.
How is the slab built for forklift traffic?
Forklift wheels put heavy point loads on the floor, so slabs get engineered from actual equipment weight, with 8 to 12 inch thickened edge footings at dock and entry points.
Can you frame for future mezzanine storage?
Yes. Tell us the anticipated point loads during design and we size posts and headers to carry a mezzanine, even if you add it years later.
Do you handle loading dock construction?
Yes. Dock height, door width and approach grading are planned into the structural design. Dock-height doors need a recessed or raised approach; grade-level overheads suit box trucks and forklifts.
What do you need from me to start the design?
Three documents: your racking plan, a list of the trucks and forklifts that will use the building, and a site survey. With those, we lay out bay spacing, door positions and slab design, then coordinate revisions as the design firms up.

Ready to Start Your Warehouse & Storage Building Construction Project?

Call now or request a free written quote. Most projects get a same-week site visit.

Call 316-688-2046 Now