Menu
Pole Barn Roofing & Re-Roofing in Wichita, Kansas - 29/26-Gauge Panel Replacement
POLE BARN ROOFING ยท WICHITA, KS

Pole Barn Roofing & Re-Roofing Services We Offer in Wichita, KS | Metal Roof Replacement in South-Central Kansas

A pole barn roof in Wichita has to survive hail, 100ยฐF sun and wind that set a 102 mph record in June 2025. Wichita Pole Barn Builders handles pole barn roofing and re-roofing with all considerations in mind. Our local team has more than 25 years of experience installing metal roofs and re-sheeting existing metal buildings. We will likely end up stripping the old steel and fastening new panels so the roof braces the building again. We've completed this kind of work on huge 50,000+ sq ft commercial buildings. Thicker steel and a better finish cost more up front, but they can really pay off here.

Call 316-688-2046 Now โ†’

Get Your Pole Barn Quote

Tell us about your project. We'll call you back fast.

We'll respond same-week. Need to talk now? Call 316-688-2046.

16ร—
Dent resistance if steel thickness doubles
0.018 in
26 ga minimum (Metal Sales)
Grade 80
Typical 29 & 26 ga panel steel
2013
Kansas roofer registration began

We Provide Pole Barn Roofing & Re-Roofing in Wichita & South-Central Kansas

A pole barn roof does more structural work than most owners realize, it's part of the diaphragm that keeps the building stable in wind.

  • Wind rating basis: 115-120 MPH ultimate
  • Snow load basis: 15-20 PSF
  • Purlin inspection: Included in every re-roof scope
  • Standard panel: 29-gauge (0.0142 in.)

Why Roof Panels Matter Structurally

Because the roof steel functions as a diaphragm, spreading lateral wind load across the structure, a roof that's failing or improperly fastened doesn't just leak. This can reduce the building's overall wind resistance.

We evaluate purlin condition and fastening pattern as part of any re-roofing scope, not just the panels themselves.

Technical Specs

  • Wind rating basis115-120 MPH ultimate
  • Snow load basis15-20 PSF
  • Purlin inspectionIncluded in every re-roof scope
  • Standard panel29-gauge (0.0142 in.)
  • Heavy-duty panel26-gauge (0.0187 in.)
  • Steel strengthGrade 80, 80,000 PSI

Purlin Inspection Before New Panels Go On

Purlins carry snow load and panel weight down to the trusses, and re-roofing over damaged or undersized purlins just locks the underlying problem under new steel.

We check purlin spacing and condition against the 15 to 20 PSF ground snow load requirement confirmed for the site before installing new panels.

Choosing Between 29-Gauge and 26-Gauge Panels

29-gauge steel at roughly 0.0142 inches is the standard panel thickness for most agricultural re-roofs. 26-gauge at roughly 0.0187 inches costs more but holds up better under hail and heavier snow accumulation.

Grade 80 steel at 80,000 PSI minimum yield strength is available on both gauges where extra panel performance is worth the cost.

Pole Barn Roofing & Re-Roofing detail - Wichita KS post-frame construction

Why We Build It This Way

Anyone can promise a sturdy building. Here's the difference between a generic sales pitch and an actual engineering answer:

"New roof, good as new."
"We inspect purlin condition against your actual snow load rating before a single new panel goes on, using 29 or 26-gauge panels depending on what that inspection shows."

Timing a Re-Roof Around Hail Season

Severe hail in Kansas runs from late March through late October, and national hail losses tend to peak from April through June. Re-roofing just ahead of that window gives new steel a full season before its first test.

After a big storm, everyone needs a roofer at once. Following the 3 September 2025 hail, one Wichita roofing company owner estimated six to eight weeks just to schedule and complete repairs, so planning ahead pays.

How Re-Roofing Projects Tend to Go In Wichita

A re-roof is part demolition and part structural repair. We keep the building closed up as much as the weather allows.

Here is the sequence.

Pole Barn Roofing Questions

Is 26 gauge worth it over 29 gauge?
Around Wichita it often is. The thicker panel resists hail denting far better, and hail is the main thing that ends a metal roof here.
What does a steel paint warranty cover?
Film integrity, meaning no peeling or cracking, is the usual core of it, and chalk and fade are covered for a shorter period. Terms vary by supplier, so we give you the panel warranty in writing with your quote.
Can new steel go over the old roof?
Sometimes, with spacers, but we recommend removing the old steel so we can check and repair the purlins.
Do roofers need a license in Kansas?
Kansas requires roofing contractors to register with the Attorney General. Work priced at less than $2,000 is exempt, but that exemption does not apply to anyone who advertises as a roofing contractor.
What is a Class 4 hail rating?
The top UL 2218 rating, passed by surviving a 2-inch steel ball dropped from 20 feet twice on the same spot.
How long does a metal roof last?
Forensic engineers at Thornton Tomasetti cite 40 to 70 years for metal roofing, depending on the steel and finish.
When is the best time to re-roof?
Before hail season if you can. Severe hail in Kansas runs from late March through late October.
Can you repair a pole barn roof instead of replacing it?
Often, yes. Most pole barn roof leaks start at fasteners that have backed out, worn washers, a loose ridge cap or flashing where the roof meets a wall, and those can be fixed without new steel. When hail or rust has damaged panels across the whole roof, replacement usually makes more sense than chasing leaks.

Price a New Roof

Send the building size and a photo of the roof. We'll inspect it and give you a free written estimate with both gauges.

Call 316-688-2046 Now