Menu
Equipment Storage Buildings in Wichita, Kansas - Machine Shed With Wide Overhead Doors
EQUIPMENT STORAGE ยท WICHITA, KS

Equipment Storage Building Contractors in Wichita, KS | Metal Storage Buildings Sized to Your Vehicles & Equipment

Equipment parked in the open around Wichita takes hail and sun year after year, and Wichita Pole Barn Builders builds equipment storage buildings that keep machines out of it. In 2025 alone, Sedgwick County accounted for more than $328 million in storm insurance payouts.

Our crews will size every machine shed from the tallest and widest piece you own, then add room to grow in case you need it later. Call our experts today if you need an equipment storage building within 150 miles from Wichita.

Call 316-688-2046 Now โ†’

Get Your Pole Barn Quote

Tell us about your project. We'll call you back fast.

We'll respond same-week. Need to talk now? Call 316-688-2046.

$328M
Sedgwick Co. storm claims, 2025
80,000
Sq ft, our largest projects
150 mi
Service radius
25+ yrs
Metal building experience

We Build Equipment Storage Buildings in Wichita & South-Central Kansas

Equipment storage buildings live or die on door width and clear interior height, more than raw square footage alone ever will.

  • Wind rating basis: 115-120 MPH ultimate
  • Framing type: Clear-span, hydraulic door headers
  • Uplift protection: Engineered mechanical anchors at post base
  • Post specification: AWPA UC4B ground contact

Designing Around the Equipment

We start by measuring the tallest, widest, and longest piece of equipment that needs to fit through the door, then engineer sidewall height, door header, and clear-span width around those numbers.

Hydraulic and bifold door headers are sized to the specific equipment list, not a generic opening.

Technical Specs

  • Wind rating basis115-120 MPH ultimate
  • Framing typeClear-span, hydraulic door headers
  • Uplift protectionEngineered mechanical anchors at post base
  • Post specificationAWPA UC4B ground contact
  • Siding80,000 PSI high-tensile steel
  • Fastener hardwareRated metal connectors

Pricing a Machine Shed

Equipment storage building projects in the Wichita area can really only be given a ballpark quote until we discuss your final plans. We will need to understand the structural materials required for your equipment storage building, and then factor in the door opening your tallest machine needs, clear span, labor, concrete and site prep. Package prices you see online often quote just a bare metal shell dropped off in your driveway. Our turnkey estimates factor in the actual build: site prep, concrete footings, slab pouring, professional framing, trim, and permit coordination. We will help you source materials at fair market pricing right across the Wichita area. That could be a simple shell with proper framing, or a 60×120 machine shed with a clear span and bifold doors, and the doors by themselves run $4,000 to $14,000+ and climb from there once the opening gets large. Call our local team today for an estimate range on the phone, and a firm figure once we have walked the site with you.

Free
Written, itemized estimate
25+ yrs
Metal building experience
3โ€“4 ft
Post Depth (Past Frost Line)

Uplift Anchoring for Large Door Openings

A building with one or more large door openings presents a different wind profile than a fully enclosed structure. Mechanical uplift anchors at the post bases matter more here, sized to the uplift the engineering calls for on your foundation.

AWPA UC4B ground-contact posts handle the ground moisture and decay down at the base, and post sizing and bracing handle the vibration and occasional impact that comes with backing heavy equipment in and out daily.

Siding and Fasteners for a Working Building

80,000 PSI high-tensile steel siding resists the dents equipment contact leaves, and its coating resists the corrosion that fuel, fertilizer, and general equipment grime accelerate over time.

Purlins fasten to trusses with rated metal connectors sized to the wind load on your building, not a generic nail pattern.

Wide door header framing across an open machine shed bay

Built for Working Agricultural Use

Equipment buildings lean hardest on the door and header side of this agricultural vocabulary. Horse barns, riding arenas, livestock buildings, and grain storage all draw on the same agricultural engineering vocabulary, refined for decades of Kansas farm use.

  • Clear-span steel truss integration. Keeps the working floor free of interior posts, which matters for equipment movement and livestock handling alike.
  • Cupolas with operable louvers. A functional ventilation feature, not just a design accent. Operable louvers let airflow be adjusted seasonally.
  • Hydraulic and bifold door headers. Sized for the specific equipment or livestock trailer that needs to pass through, with reinforced headers on wider bifold openings.
  • Kickboards and stall mats. Tongue-and-groove yellow pine kickboards protect stall walls from impact, paired with stall mats for footing, drainage, and reduced dust in daily use.
  • High-tensile steel siding. 80,000 PSI high-tensile steel siding is common on agricultural buildings that see equipment contact, since a higher yield strength at the same gauge dents less than standard panel.
  • Agricultural clearance heights. Eave heights of 16 to 20 feet are common where taller equipment, hay stacking, or livestock handling equipment needs to pass through freely.
  • Dutch doors and sliding track hardware. CannonBall or National Frame track systems let a stall door open without swinging into an aisle, which matters more once you're moving equipment through the same space.

FAQs on Equipment Metal Buildings in the Wichita Area

How do you size the door for something like a combine?
We measure the tallest, widest, and longest machine you own, folded attachments included, then engineer the header, sidewall height, and clear span around those numbers.
How tall do the sidewalls need to be?
Eave heights of 16 to 20 feet are common where taller equipment or hay stacking has to pass through freely. We set yours from your actual equipment list.
Can the building have more than one large door?
Yes, though two or more large openings on the same wall change the wind profile, so we review bracing and uplift requirements for that layout specifically.
Does a building with big openings need special anchoring?
Yes. Mechanical uplift anchors at the post bases matter more on a building that is not fully enclosed, and we spec AWPA UC4B ground-contact posts throughout.
Is a concrete floor necessary for equipment storage?
Not strictly. A properly graded 4,000 PSI slab does make equipment easier to move around on than gravel, and it keeps the building cleaner to work in.
How do you protect siding from fuel and chemical exposure?
80,000 PSI high-tensile steel siding with a corrosion-resistant coating and fasteners is the baseline, since fuel, fertilizer, and general grime accelerate corrosion. For heavy chemical storage we can discuss additional coatings.
What drives the price of a machine shed?
The door opening your tallest machine needs, clear span, labor, concrete, and site prep. We give a range by phone and a firm figure after walking the site.
Can I see examples of similar buildings you've completed?
Yes, ask during your site visit and we can share reference photos and, where possible, put you in touch with a past client who built something similar.

Size Your Machine Shed

Send us your biggest machine's dimensions. We'll size the building and doors and give you a free written estimate.

Call 316-688-2046 Now